Quick Start Guide

Quick start guide

Thank you for choosing the iRESTORE Flex Belt! Follow these instructions to start your journey.
  1. Prep

    Choose your treatment area. Common areas include the waist, lower back, shoulders, knees, and legs. Clean and dry your skin in the treatment area.

  2. Wrap

    Secure the belt snugly around the chosen area so LEDs touch or hover just above the skin. Avoid over-tightening.

  3. Power On

    Press and hold the button for 2 seconds to start the treatment.

  4. Set Brightness (optional)

    Short-press the bulb button to select: Level 3 = 100% brightness (default), Level 2 = 75% brightness, Level 1 = 50% brightness

  5. Set Timer (optional)

    Short-press the clock button to select: 10 Min (default), 20 Min, 30 Min.

  6. Relax

    Relax and keep the belt in place for the selected duration. The Flex LED Belt will automatically shut off and emit a beep when the session ends.

  7. Manual Power Off (anytime)

    Press and hold the power button for 2 seconds.

CHARGING THE FLEX LED BELT

  1. Connect the controller to the charger until fully charged (the Level 3 and 10 Min indicators will remain solid).
  2. Unplug the controller before powering on the belt for use.
  3. The belt will not operate while connected to a power source. Always unplug the charging cord before use.